Crimestopper Security Products CS-2002DC SERIES III - Manual (Page 17)

OPERATING INSTRUCTIONS
IGNITION-CONTROLLED DOORLOCKS
The doors will automatically lock when the ignition is turned on and will unlock when the ignition is turned off.
This feature can be programmed on, off, or to lock the doors only. Doors will not lock if they are open to
prevent locking the keys in.
ACTIVE RE-ARMING (FAIL-SAFE PROTECTION)
Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a
door has not yet been opened. This is handy if the vehicle is accidentally disarmed (via the transmitter in your
pocket) without you knowing it. This feature can also be turned off in programming option (4).If programmed
for Passive Chirp Countdown, the unit will emit a chirp every 2 seconds until the system Active Re-arms.
2 nd AUX. OUTPUT (REMOTE AUX. OUTPUT 2)
To activate the Second auxiliary output press Button #5 on the side of the remote first, then Press Button #4
(Panic) to activate AUX. channel #2. This output can be used to control optional add-on accessories such as
Remote Engine Start Modules, Window Roll up/down modules, etc.
ARM/DISARM WITH IGNITION ON (PROGRAM OPTION #15)
This feature allows the system to be armed or disarmed while the ignition is in the ON position or vehicle is
running. The feature is disabled by default and should not be used under normal operating conditions. In
some rare instances where an add-on remote start module is used, this option can be enabled to allow the
CS-2000 alarm to be armed or disarmed when the vehicle is remote started (Ignition ON).
2 VEHICLE OPERATION
2 VEHICLE CONTROL
Your remote control can be programmed to Arm/Disarm a second vehicle with an identical Crimestopper CS-
2002DC Series III system installed. Follow the transmitter programming steps on the second vehicle. Instead
of pressing the #1 Lock at step #3, press Button #4 (Panic) on YOUR existing remote. Your remote will now
have arm/disarm control of the second vehicle with a quick press and release of your Button #4 (Panic). The
second car will learn your remote’s panic button for Arm/Disarm.
NOTES: When both vehicles are present, don’t press the Panic button for too long or YOUR alarm
system may trip. You can only arm & disarm the second vehicle. You cannot control any special
features or Aux functions on the second car.