Crimestopper Security Products CS-2002DC SERIES III - Manual (Page 10)

OPTION PROGRAMMING
1. Turn the Ignition ON and press the Override/Program button 5 times. You should hear a long chirp.
2. Within the next few seconds, press the Override/Program button [again] the number of times that
corresponds to the feature list below. The siren will chirp for each button press. DO NOT LOSE COUNT!!
3. When you get to the desired option number, press the appropriate button on the transmitter according to
the chart below. Turn Ignition off. See Below for Option numbers, descriptions, and values. (Button 1
gives a single light flash/chirp, Button 2 gives two light flashes/chirps, and Button 3 gives three light
flashes/chirps.)
4. Change ONE option at a time repeating steps 1-3 as needed. When you are finished customizing options,
check operation to see if the option(s) have changed.
PROGRAMMING OPTIONS CHART * = Default Setting
Option # Option Description BUTTON 1
LOCK
BUTTON 2
UNLOCK
BUTTON 3
TRUNK
1. Factory Horn Chirps / Pulses Pulse with
trip only
Arm/Disarm Chirps
& Pulse with trip
Arm/Disarm/Warn Chirp
& Pulse with trip *
2. Passive Arming /
Passive Chirp Countdown ON OFF* Passive Arm with
Chirp Countdown
3. Passive Lock / Cust. Override ON OFF* Custom Override
4. Ignition controlled Locks ON* OFF Ignition Lock Only
5. 10/60 Sec. Door Warning 10 Sec. 60 Sec.*
6. Active Re-Arm ON* OFF
7. Double Unlock Pulse OFF* ON
8. Silent Arm/Disarm
(Chirp Defeat)
OFF* ON
9. Parking Lights on with disarm ON* OFF
10. Disarm with trunk pop OFF ON*
11. Silent Arm/Disarm with quick
press on Button #3. ON* OFF
12. Door Lock Pulse Time 0.7 Sec.* 3 Sec.
13. Type of Carjack Protection ACTIVE* PASSIVE FULL-TIME
14. Carjack Enable/Disable DISABLE* ENABLE
15. Arm/Disarm with IGN on
(**Overrides Carjack functions) DISABLED* ENABLE**