Scilogex MS7-H550-S - Manual (Page 8)

6
Analog 7” Square (Hotplate) Magnetic Stirrer
Items Default settings
Speed control Knob Stir
Set the rated rotary speed. The
stirring function is switched
ON or OFF by pushing the
knob.
Temperature control knob
Heat (Hotplate)
Set the rated temperature. The
heating function is switched
ON or OFF by pushing the
knob.
LED Heat (Hotplate)
When the heating function is
switched ON, the LED Heat is
lit.
LED Stir
When the stirring function is
switched ON, the LED Stir is
lit.
Safe temperature
control Knob
Set safety temperature, stop
heating when exceed secure
temperature.
Power Switch
S w i t c h O N o r O F F t h e
instrument.
Table 2
5.Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be properly grounded.
• Plug in the power cable，ensure the power is on and
begin initializing.
• Add the medium into the vessel with a stirring bar.
• Place vessel on the work plate.
• Set the rated stirring speed and begin.
• Set the rated temperature and start heating.
• Begin the heating and stirring functions.
If these operations above are normal, the device is ready
to operate. If these operations are not normal, the device
may be damaged during transportation, please contact
manufacturer for technical support.