Scilogex MS7-H550-S - Manual (Page 6)

4
Analog 7” Square (Hotplate) Magnetic Stirrer
excessively high temperatures to be measured especially
in with poor conductivity.
• The tip of the measuring sensor must be at least 5 mm
from vessel bottom; a distance of 10 mm is ideal.
• The instrument can only be disconnected from the main
power supply by pulling out the main or the connector
plug
• The voltage stated on the label must correspond to the
main power supply.
• Ensure that the main power supply cable does not touch
the hotplate. Do not cover the device.
• The instrument may only be opened by experts.
• Keep away from high magnetic field.
2.Proper use
The instrument is designed for mixing and/or heating liquids
in schools, laboratories or factories.
• Observe the minimum distances between the devices,
between the device and the wall and above the assembly
(min. 100 mm)
This device is not suitable for using in residential areas or
other constraints mentioned in Chapter 1.