Scilogex MS-S - Manual (Page 7)

5
MS-(H)-S Analog (Hotplate) Magnetic Stirrer
5 Control and Display
LED
Heat
Heating Knob
(MS-H-S)
Stirring Knob
LED
Stir
Figure 2
Figure 3
Stirrer bar 1
User manual 1
Table 1
4 Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be earthed.
• Ensure the power be off and the speed control knob and
the temperature control knob to the lowest position
• Plug in the power cable and power on the device.
• Add the medium into the vessel with a stirring bar.
• Put the vessel on the plate.
• Set the rated stirring speed and the device begins to work.
• Set the rated temperature and the device begins to
work(MS-H-S).
• Keep the temperature control knob and the speed control
knob slowly to the lowest position to turn off the function.
If these operations above are normal, the device is ready to
operate. If these operations are not normal, the device may
be damaged during transportation, please contact DragonLab
corporation for technical support.