Specifications 2. declaration of conformity – Scilogex D2012 Micro-Centrifuge User Manual
Page 6
USER MANUAL
www.scilogex.com
Page 6
1. Specifications
2. Declaration of Conformity
Maximum speed
15000rpm, increment: 100rpm
Maximum RCF
15100×g, increment: 100×g
Maximum capacity 2ml×12
Timer
30 seconds -99 minutes-HOLD, continuous operation
Driving Motor
Brushless DC motor
Safety devices
Door interlock; Over-speed detector; Over-temperature detector; Automatic internal diagnosis
Power requirements Single-phase, 110V-240V, 50Hz/60Hz, 3A
Dimensions(mm)
(L)255×(W)245×(H)140
Weight
6kgs
Additional features
Speed/RCF switch; Pulse operation; Processing display; Voice reminder
Construction in accordance with the following safety standards:
EN 61010-1
EN 61010-2-20
Construction in accordance with the following EMC standards:
EN 61326-1/ FCC Part 15 Subpart B/ IECS 001
Associated EU guidelines:
EMC-guidelines: 2004/108/EC
Centrifuge guidelines: 2006/95/EC
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This centrifuge has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the centrifuge is operated in a commercial environment. The centrifuge generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the user manual, may cause harmful interference to radio
communications. Operation of centrifuge in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference.