Specs – Schiit Ragnarok User Manual
Page 10
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-180KHz, -3dB
Maximum Power, 4 ohms: 100W RMS
Maximum Power, 8 ohms: 60W RMS
Maximum Power, 32 ohms: 15W RMS
Maximum Power, 50 ohms: 10W RMS
Maximum Power, 300 ohms: 1.7W RMS
Maximum Power, 600 ohms: 850mW RMS
Maximum Power, single-ended headphone output: 5W into 32 ohms
THD: Less than 0.005%, 20Hz-20KHz, at 1V RMS, all gain modes
IMD: Less than 0.007%, CCIR at 1V RMS, all gain modes
SNR: More than 100db, unweighted, referenced to 1V RMS,
in gain = 1 mode
Crosstalk: Less than -80dB, 20Hz-20KHz
Damping Factor: Greater than 200 into 8 ohm speakers,
all gain modes
Output Impedance, balanced headphone output: less than 0.1 ohms
Output Impedance, single-ended headphone out: 3.3 ohms
ITEM
SPECS
Gain: 20 (26dB), 5 (14dB), 1 (0db) via front panel switch
Topology: Fully discrete Crossfet™ circlotron-style output stage with
direct-coupled solid state gain stage, no DC servo.
Protection: microprocessor monitoring of fault conditions including
DC, overcurrent, and transient phenomena, with relay muting on
any fault
Power Supply: 400VA transformer with 4 separate circlotron output
rails, plus 36VA transformer for five separate regulated supplies for
front end and control section; over 100,000uF filter capacitance total
Power Consumption: 75W quiescent, 400W max
Size: 16 x 12 x 3.875”
Weight: 30 lbs
ragnarok owner's manual.indd 10
4/10/14 2:38 PM