Roadi OT900 - Manual (Page 15)

OWNER S MANUAL
,
Oil reset tool
14
======================================
Oil Insp Lig ht
Service Reset failed!
Press any key to con.
4) If a the service can not be performed automatically, following screen
shows:
● If the airbags can not be reset automatically, a “LINK ERROR!”message
comes up and you can not reset them manually. Follow on-screen
instructions to trouble shoot it.
5) Press any key to continue to perform setup manually.
======================================
Manual
Reading Channel Data...
-Please Wait-
28
6) Wait a few seconds till following screen shows:
====================================1/3
Min Mil. to Service
Channel No 42 (Mil)
Current Value 9000
Set Value 9000
[N] = Next, [Y] = Set/Exit
Use or to change
7) Repeat Step 7-10 on Page 12-13 to perform the setup.
3.2 Instructions for BMW
1) Turn the ignition off.
2) Locate the vehicle’s Data Link Connector (DLC).
3) Plug proper connector to the vehicle’s DLC.