Roadi OT900 - Manual (Page 13)

OWNER S MANUAL
,
Oil reset tool
12
===================================2/3
===================================2/3
Mil. Since Service
Manual
Channel No 40 (Mil)
Current Value 700
Set Value 700
[N] = Next, [Y] = Set/Exit
Use or to change
Back Save Exit
[Back] = Cont. to Set
[Save] = Save Setup
[Exit] = Cancel Setup
●
x/y to the upper rig ht part of the screen indicates total number of
supported service channels and the sequence of current channel.
8) Use
N button to move to next setup screen.
●
Different vehicle supports different oil service channels, so retrieved
channel numbers vary from one vehicle to another. Normally, a vehicle
supports 1-5 channels.
● Current Value” is the value of the most recent setup retrieved by the
tool. If you change your mind after making new setups, it can be used to
reset all changed values to the original ones. Write down this value before
making any changes.
9) Use
UP/DOWN scroll button to select Save and press Y button to
save your settings.
● If you want to continue to set values, use
UP/DOWN scroll button to
select
Back and press Y button to return to continue setup. If you want to
cancel all setups, use
UP/DOWN scroll button to select Exit and press Y
button, or simply press
N button to exit.
10) Wait a few seconds till the “RESET OK!” message comes up.
Press any key to return.