Rega RP8 - Manual (Page 9)

8
Glass Platter Alignment Protractor
Drive Belts Drive Pulley Top Brace Balance Weight
Tracking
Force
Control
2g 1g
Bias Adjustment
SETTING UP AND POSITIONING YOUR RP8 TURNTABLE.
Always take great care when unpacking the turntable. Extra care must be taken if your RP8 is
supplied with a cartridge factory fitted so as not to damage the stylus. Place the turntable on a
sound and level surface.
The RP8 inner plinth sits within the outer frame, locates and self centralises via three rubber
triangulated ‘o’ rings. Ensure correct alignment and check that the tonearm phono lead assembly
and motor lead are clear of the feet and are not contacting the plinth.