Rega RP6 User Manual
Page 8
7
TTPSU
The tips we give here will help to give you maximum musical enjoyment and ease of use for many
years.
Connect the turntable power interconnect between the TTPSU and the turntable.
Make sure the PS1 mains transformer is plugged in and connected to the 24v AC input terminal
in the back of the TTPSU. Switch the mains power on.
Push the power button on the front panel to turn the TTPSU on - When the power supply is
switched on, the Rega logo will illuminate RED, This indicates that 33 rpm is selected. To
deactivate 33 rpm press the 33/45 button, this will turn the Rega logo to GREEN and will select
45 rpm.
To deactivate 45 rpm press the button again and the Rega logo will return to RED, re-selecting
33 rpm, Please see front panel illustration on page 8.
To minimise the risk of hum pick up by the cartridge, the power supply should be situated as far
from the turntable as the interconnect cable will allow.
PLEASE NOTE: When using the TTPSU always leave the belt in the top position as
illustrated. There is no need to move the belt position on your RP6.
33
1/3
RPM
45 RPM