RearviewSafety RVS-800GS - Manual (Page 9)

9
automatically split and saved as another file.
(3). When the memory card is full, the previous files can not be automatically overwritten, so the screen will show”
card full, can not loop recording”, you need to delete the files by hand so that the device have enough space to continue
recording.
 When the loop setting mode is "1 min","3min",5min"
(1). IF the device is connecting to charger, when it power on, the device will record automatically.
(2). IF the memory card is full, the card will be automatically covered and overwritten from the first saved file , it will
not stop, so you needn’t worry about card full.
13. Stamp : Time /Date/ Date time/GPS data /driver number/off
1. After you choose a kind of stamp, when you start recording, the stamp would be written into your video file automatically.
When you playback the video, you can see the stamp (picture 1).
2. Driver number is 9 character driver numbers, license plate
Picture 1. Picture 2.
14. GPS
1).Power on your DVR, the satellite searching will be start automatically. When GPS signal is located, will be
showed on the display. When GPS signal is located, the DVR will auto record your driving track and entry the GPS file in
you TF card.
2). Car Speed.
When GPS signal is located, the screen will display the car speed V: -----KM/H.
3).Google Map.
With our special player, you can see your car tracking in the Google Map clearly, the player also show you the vehicle speed
and G-Sensor information. See picture 2.
15. Video Player Drive
 How to get the video player drive
1. Connect the machine (without card) with computer.
2. There are 2 removable disks (if your machine have built-in card function, you will see 3 removable disks)