beautypg.com

Qmark I SERIES - Industrial Floor Air Circulator User Manual

Rollaire fan, Read and save these instructions

background image

READ AND SAVE THESE INSTRUCTIONS

ROLLAIRE FAN

READ AND SAVE THESE IMPORTANT INSTRUCTIONS

Your High Velocity Air Circulator has been designed and manufactured using the latest in technology. With normal
care and use, it should provide many years of satisfactory performance. As with all small appliances, it is recom-
mended that you note the following:

• ALWAYS unplug unit for cleaning.
• ALWAYS unplug unit when not in use.
• ALWAYS unplug when moving the fan from one location to the next.
• DO NOT place foreign objects through guard into blade
• DO NOT allow to become wet or damp.
• WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid state speed control

device.

OPERATING INSTRUCTIONS

This high quality fan features a three (3) speed air flow selector switch, which allows you to select desired amount of
air and velocity.

Marley Engineered Products air circulators can be used alone or in conjunction with an air conditioning unit circulate
the cooled air or to force it into other rooms.

In the evening, a Marley Engineered Products Air Circulator will exhaust the stale, hot air and pull the fresh, cool night
air in whenever other windows are open.

NOTE: Because the high velocity are flow draws in air from the sides of the air stream, Marley Engineered Products
Air Circulators exhaust much more air when placed one foot back from a window.

Use a normal household cleaner to clean the exterior of the fan.

It is normal for the motor to feel warm to the touch during operation. The motor is thermally protected and will auto-
matically shut off should it overheat for any reason. If this happens, immediately disconnect the fan from the power
outlet.

ASSEMBLY INSTRUCTIONS
Tools required: Crescent wrench, screwdriver and 1/8” Allen wrench.

SHORTER LEG SECTION

ACORN
NUT

CROSS BRACE

CARRIAGE

BOLT

LONGER LEG

SECTION

FRONT

FIG. 1

Step1: Assemble cross brace to the front of both legs. The shorter section

of the leg is the portion which goes on the floor. Insert the carriage

bolt through the square hole in the brace and the
round hole in the leg. Tighten acorn nut securely.