PulseTech SC-12 SuitCase Charger (746X810) - Manual (Page 3)

2 3
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS – This manual contains important safety and
operating instructions for your SC-12 SuitCase Charger.
2. Use of an attachment not recommended or sold by PulseTech Products may result
in a risk of fire, electric shock, or injury to persons.
3. To reduce risk of damage to electric plug and cord, pull by plug rather than cord
when disconnecting charger.
4. An extension cord should not be used unless absolutely necessary. Use of improper
extension cord could result in a risk of fire and electric shock. If extension cord must
be used, make sure:
a) That pins on plug of extension cord are the same number, size and shape as
those of plug on charger;
b) That extension cord is properly wired and in good electrical condition; and
c) That wire size is large enough for ac ampere rating of the charger as
specified:
Length of cord (ft): 25 50 100
AWG size of cord: 16 12 10
5. Do not operate charger with damaged cord or plug – replace the cord or plug
immediately.
6. Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way; take it to a qualified serviceman.
7. Do not disassemble charger; take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk of electric shock or fire.
8. To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning. Turning off controls will not reduce this risk.