Getting started, Power on/off and audio volume, Controls – Cobra Electronics XRS 9960G User Manual
Page 7: Standby screen icons
7
6
English
Getting Started
Nothing Comes Close to a Cobra
®
To Turn On the Unit and Adjust the Audio Volume
Rotate the On-Off /
Volume control clockwise
(away from you).
Unit will cycle through
Power On / Self Test.
Alert Settings will scroll.
Check marks indicate
which are set. (Factory
defaults are shown when
the unit is new.)
Shows only when the
Optional GPS Locator is
installed. See page 33
for more information.
Standby screen will show
City or Highway and Car
Battery Voltage icons.
Compass and IntelliMute will
also show if turned On and
set in the User Settings Menu.
Visual Display
None
None
Three beeps
Testing, then
three beeps
None
None
None
System Ready
Power On/Off And Audio Volume
•
Controls
•
While working with this manual, page A2 can be folded out for reference
to the controls on the detector unit.
Your Detector
Getting Started
Your Detector
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition
is Off. If this is the case with your vehicle and you have turned the SmartPower
Off, you should turn Off or unplug your detector when parking for lengthy periods.
Cobra recommends leaving SmartPower at the factory setting, which is On.
SmartPower is described on page 22.
Standby Screen Icons
•
NOTE
For example, the sample screen above indicates that IntelliMute is active,
the Compass is calibrated, your system is set to City mode and your
vehicle's battery voltage is 13.6. The GPS icon will appear in the center
of the screen only when the GPS Locator is connected.
City Mode
Highway Mode
Compass
(Southeast)
Car Battery
Voltage
IntelliMute Above
Activation Point
IntelliMute Below
Activation Point
User and Alert
Settings Menu
Sample Screen
(See note)
Tone
Voice