Pro-Ject Audio Systems Set Micro-Hifi-System User Manual

Page 7

Auto store function

Long press

starts,

confirms the auto store function.

clears the complete memory while

storing.

keeps stations with good signal strength in the memory and overwrites stations with insufficient

signal level while storing.

Front panel controls - Receiver Box S

Receiver Box S

To switch on from standby or to standby - Receiver Box S

The push button on the left hand side will toggle the receiver between its fully operational status and standby.
The blue LED above the stand-by push button shows that the unit is switched on.
In standby the display will show STANDBY.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.

Input selector

After the unit is powered on, the push button selects the inputs IN1, IN2 and the tuner mode in turn. The
display will show the volume level and the selected input: TUNER, IN1 or IN2.
The optional input expander Pro-Ject Switch Box S provides three more inputs. For further details please see the
user guide of the Pro-Ject Switch Box S.

Volume

and adjust the volume (95 steps) to the desired level. The display will show the volume level set.

-95dB indicates min., 00dB max..

Mute

While the unit is powered on,

ON/OFF

activates and deactivates mute

Dimming the display

After pressing

VOL

on the remote control,

TUNE

set the brightness of the display.

Available settings: DIM MIN, DIM 1 - DIM 4 and DIM MAX. The display will show the selected setting.