Connection to a tv-set or a beamer, Fitting and adjustment of the ipod, Cradle – Pro-Ject Audio Systems Set Micro-Hifi-System User Manual

Page 4: Mains power connection

Connection to a TV-set or a beamer

Connect the S-VIDEO socket to a s-video input of your TV-set or beamer.

Fitting and adjustment of the iPod

cradle

Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet.
Now place your iPod

on the Dock Box contacts. Move the cradle so that it supports the iPod

and tighten

the screw.

Suitable for iPods

with 30-pole connector only.

Use without the cradle breaks the 30-pole connector of the Dock Box and the socket of the iPod

Before connecting the iPod

, any sort of cover has to be removed.

Mains power connection

Receiver Box S
Connect the low voltage plug from the power supply to the Power 20V

socket before connecting the power

supply to the mains.
CD Box S

Connect the low voltage plug from the power supply to the Power 9V

socket before connecting the power

supply to the mains.

Dock Box S Fi
Connect the low voltage plug from the power supply to the Power 18V

socket before connecting the power

supply to the mains.

Never use any other power supply than the one supplied with the particular unit.

To switch on and off, loading the battery - Dock Box S Fi

The push button on the front panel turns the Dock Box on and off. The blue LED above the push button shows
that the unit is switched on.
When the Dock Box is connected to the mains supply and switched on, the iPod

will start recharging as soon

as it is placed on the contacts. Recharging will continue even if the iPod

is on standby. Recharging is not

possible, when the Dock Box is switched off.