Pro-Ject Audio Systems Set Micro-Hifi-System User Manual

Page 3

Connecting receiver, docking station and CD player

Connect, using the supplied interconnect cables, the sockets IN1 on the receiver to the sockets OUT on the
CD Box S. The sockets OUT of the Dock Box S Fi have to be connected to the sockets IN2 on the receiver.

Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.

Antenna input

Connects any antenna cable with a co-axial DIN-plug / US-model F-plug.

Connecting receiver and speakers

The output terminals accept loudspeaker cables terminated with 4mm  Banana plugs, spades connectors

or naked wire.
Connect the cable terminals on the receiver to the terminals on the speakers.

The red speaker terminals carry the positive signal (+), the black speaker terminals the negative
signal (–). Make sure the polarity of the connection is correct at each end of the cables.
Only connect one loudspeaker with an impedance not less than 4 ohms per channel.

Connectors - CD Box S

Pro-Ject Audio Systems, Vienna, Austria

Make all connections whilst the CD player is disconnected from the power supply.

Connection to a external A/D-converter

Connect the Co-axial out socket to a coaxial digital input on the D/A converter or AV processor. Doing so
allows you to use the signal in its digital for further digital processing.

Connectors - Dock Box S Fi

Pro-Ject Audio Systems, Vienna, Austria

18V

Make all connections whilst the Dock Box is disconnected from the power supply.

Connecting to a computer, iPod

operating system

Connect the USB-output of the Dock Box to a free USB-socket on your computer and turn it on/make sure it

is powered on.

When the Dock Box is connected to a computer, all functions of the Dock Box are blocked.