Pro-Ject Audio Systems Stereo Box DS User Manual

Page 3

Remote control

ON/OFF

short press turns the unit on, long press takes it back into standby.

Powered on, a short press activates and deactivates mute

VOL

and

VOL

adjust the sound volume

CH+

CH-

VOL+

VOL-

ON/OFF

and

select the inputs

Front panel controls

Stereo Box DS

To switch on from standby or to standby

on the front turns the unit on or back into standby. The display shows STANDBY when the unit is in standby.

While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next

power on.

Dimming the display

Press and hold the buttons and will change the display brightness - full, half and one third.

Input selector

Pressing the Input Select buttons and selects the inputs 1 - 4 in turns. The selected input will be shown in
the display.

Volume

Adjust the volume (95 steps) to the desired level using the buttons and . The volume level will be shown in

the display. -95dB indicates min., 00dB max..

Mute

While the unit is powered on,

ON/OFF

activates and deactivates mute