Crate Amplifiers RFX200S - Manual (Page 16)

RFX200S TECHNICAL SPECIFICATIONS:
Output Power Rating 70W per channel @5% THD, 8 ohm load
100W per channel @5% THD, 4 ohm load
Speaker Size and Rating (2) Celestion Seventy 80W 12” 8 ohm
Input Impedance 470k
Ω
Total System Gain Ch 1 74dB, all controls @10
Ch 2 88dB, all controls @10
Ch 3 103dB, all controls @10
Maximum Input Signal Accepted 5 volts peak-to-peak
Channel 1 Low Control 26dB range @ 70Hz
Mid Control 10dB range @ 900Hz
High Control 20dB range @ 10kHz
Channel 2 Low Control 26dB range @ 70Hz
Mid Control 10dB range @ 900Hz
High Control 20dB range @ 10kHz
Channel 3 Low Control 17dB range @ 100Hz
Mid Control 16dB range @ 1kHz
High Control 12dB range @ 7kHz
Power Requirements 120 VAC, 60Hz, 95VA
100/115VAC, 50/60Hz, 95VA;
230VAC, 50/60Hz, 95VA
Size and Weight 21” H 27-3/4” W x 11-1/4” D, 45 lbs.
The RFX200S is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
www.crateamps.com
@2005 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-387-02 • 083105
RFX200S
Three-Channel Guitar Amplifier with Stereo DSP