Crate Amplifiers TB10 - Manual

Output Power Rating 15 watts
THD 0.9% 20Hz - 20kHz
Input Signal Level 150mV
Input Impedance 600 ohms
Speaker 8” 8 ohm 30 watt
Input Power Requirements 120 VAC, 60Hz, 30VA
230VAC, 50Hz, 30VA
Cabinet Size and Weight 13-3/4” H x 12-1/2” W x 8-1/2” D, 17 lbs.
TB10 TECHNICAL SPECIFICATIONS
The TB10 is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
www.crateamps.com
@2004 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
18-950-01 • 051204
User’s Guide
TB10 Guitar Amplifier
TB10
Bass Amplifier
INPUT
B+
B–
POWER SW
POWER LED
VOLUME
POWER SUPPLY AC POWER
HIGH
EQUALIZATION PREAMP
LOW
HEADPHONES
CD
INPUT
COMPRESSOR
POWER
AMP
SPEAKER
Block Diagram: