Compaq AlphaPC 164LX - Manual (Page 51)

Alpha SRM Console Firmware 7–9
Basic Alpha SRM Console Command Descriptions
The data to be deposited.
Options
- The location immediately preceding the last location referenced by
examine or deposit.
* The location last referenced by examine or deposit .
@ The location addressed by the last location referenced by examine or
deposit .
deposit Command Option Description
-b Specifies data type is byte.
-w Specifies data type is word.
-l Specifies data type is longword.
-q Specifies data type is quadword.
-o Specifies data type is octaword.
-h Specifies data type is hexword.
-physical References physical address space.
-virtual References virtual address space.
-gpr References general-purpose register address space.
-fpr References floating-point register address space.
-ipr References internal processor register address space.
-n Specifies the number of consecutive locations to
examine.
-s Specifies the address increment as a hexadecimal value.
This option allows you to override the increment that is
normally derived from the data size.
Symbolic
Address
Description