Casio Celviano AP-400 - Manual (Page 18)

E-14
Recording and Play Back
You can store the notes you play in digital piano
memory for later playback.
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
■ Memory Capacity
• You can record approximately 5,000 notes in digital
piano memory.
• When remaining memory capacity is 100 notes or
less, the track lamp flashes at high speed to alert
you.
• Recording stops automatically if the number of
notes in memory exceeds the maximum.
■ Recorded Data
• Keyboard play
• Tone used
• Pedal operations
• Reverb and chorus settings (Track 1 only)
• Tempo setting (Track 1 only)
• Layer setting (Track 1 only)
■ Recorded Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no responsibility
for any damages, lost profits, or claims by third parties
arising from the deletion of recorded data due to
malfunction, repair, or for any other reason.
■ Using the RECORDER Button
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
METRONOME
RECORDER
LR
SONG /
Tracks
Song
Record
Record
While playing
back. . .
Track 2
Track 1
Playback
Standby
Record
Standby
Normal
Lit Flashing Off
AP400_e.book 14 ページ ２００８年４月１５日 火曜日 午後１２時３０分