Casio Celviano AP-400 - Manual (Page 16)

E-12
Playing Back Built-in Songs
IMPORTANT!
• After you select a built-in song, it can take a number of
seconds for the song data to be loaded. While the data is
being loaded, the keyboard keys and button operations
will be disabled. Selecting a song while playing
something on the keyboard will cause sound output of
the keyboard notes to stop.
Your digital piano comes with a Music Library of 60
built-in tunes. You can play all 60 tunes in sequence,
from beginning to end.
1. While holding down the TONE/SETTING
button, press the SONG
X/„ button.
• This will start repeat demo playback of the built-in
songs in sequence, from 01 through 60.
• You can play along with a song on the keyboard as it
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.
• You can select a specific song during demo playback.
For details, see step 2 under “Playing Back a Specific
Music Library Song”.
2. Press the SONG X/„ button again to stop
built-in song play.
NOTE
• The tune selection and playback stop operations
described above are the only operations that are possible
during demo tune play.
• Built-in tune MIDI data is not output during built-in
song play.
1. Find the song number of the song you want to
play in the song list on page A-1.
2. To change to another song, hold down the
TONE/SETTING button as you use the
SONG SELECT keys to specify a song
number.
• Each press of the + or – key raises or lowers the song
number by 1.
• You can use the value input keys (0 to 9) to enter a
specific song number. Be sure to input all two-digits.
Example: To select song 08, enter 0 and then 8.
IMPORTANT!
• Be sure to allow a bit of time between + and – key
operations. Performing a series of + and – key operations
too quickly can cause some of the operations to be
skipped.
LR
TONE/SETTING
SONG /
Playing Back All of the Built-in
Songs
Playing Back a Specific Music
Library Song
AP400_e.book 12 ページ ２００８年４月１５日 火曜日 午後１２時３０分