Canon FORMULA CR-80 User Manual

Page 14

WARNING

Do not use flammable liquids to clean the scanner, including
alcohol, benzene, or paint thinner.

Spin the rollers while wiping them clean with a firmly
wrung cloth dampened with water or a mild detergent.

There are 18 roller positions, as shown in the diagram below.

NOTE

• Use cotton swabs to clean the rollers in locations that are too narrow

for your fingers, such as a, b, j, n, o, and p.

• Rollers in positions b, d, e, k, and p are turned by the roller in

position e. Turn the roller in position e to wipe the rollers.

• Rollers in positions m and n comprise two rollers each, an upper

roller and a lower roller.

• Do not force the rollers if they will not turn. In this case, wipe dirt only

off of the exposed area.

Use cotton swabs to clean the entire scanning glass. There
are two scanning glass areas, one on each side. Use a
cotton swab to wipe dirt from the entire surface of each.

Scanning
Glass

This manual is related to the following products:

FORMULA CR-50