CDA RC 9000 - Manual (Page 7)

7
Electronic programmer
A
U
T
O
Fig. 5 Fig. 4
Description of the buttons:
Timer
Cooking time
End of cooking time
Manual position and cancellation
of the inserted cooking pro-
gramme
Advancement of the numbers of
all programmes
Turning back of the numbers of all
programmes and changing the
frequency of the audible signal.
Description of the lighted symbols:
AUTO - flashing - Programmer in auto-
matic position but not pro-
grammed
AUTO - always lighted - Programmer in
automatic position with pro-
gramme inserted.
Automatic cooking taking place
Timer in operation
and AUTO - flashing - Programme
error.
(The time of day lies between the
calculated cooking start and end
time).
Note: Select a function by the respec-
tive button and, in 5 seconds, set the
required time with the
/ buttons
(“one-hand” operation).
A power cut zeroes the clock and can-
cels the set programmes.
The electronic programmer is a device that groups together the following functions:
– 24 hour clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Programme for automatic oven cooking
– Programme for semi-automatic oven cooking.