Cabletron Systems SWPIM-BRI - Manual (Page 29)

Environmental Requirements
SWPIM-BRI Installation Guide A-3
A.2.2 Pinout for the U-Interface Connector
The network interface pin assignments for the U-interface network
connector are listed in Table A-2.
The connector for the U-interface is shown in Figure A-2:
Figure A-2 U-Interface RJ48 Pinout
A.3 ENVIRONMENTAL REQUIREMENTS
Table A-2 Pinouts for the U-Interface Connection
Pin Signal Direction
1 No Connection
2 No Connection
3 Uline I/O
4 Uline I/O
5 No Connection
6 No Connection
Operating Temperature: +5° to +40°C (41° to 104°F)
Non-operating Temperature: -30° to +90°C (-22° to 194°F)
Operating Humidity: 5% to 90% (Non-condensing)
1 2 3 4 5 6
urj45