4 connecting to the network, 5 completing the installation, Connecting to the network -5 – Cabletron Systems SWPIM-BRI User Manual

Page 25: Completing the installation -5, Ork (section 1.4)

Text mode
Original mode

Connecting to the Network

SWPIM-BRI Installation Guide

1-5

1.4

CONNECTING TO THE NETWORK

Figure 1-2 depicts a typical configuration for the SWPIM-BRI. The
Cabletron Systems part number for the cable is 9360005-x, where x is the
length of the cable.

Figure 1-2

Typical Configurations

1.5

COMPLETING THE INSTALLATION

After installing the SWPIM-BRI, the SWPIM-BRI will need to be
configured for the network. Refer to the host platform software
documentation in order to set up and manage the SWPIM-BRI using the
software.

SSR-600

SWPIM-BRI
S/T-interface

Site 2

WAN Cloud

SSR-600

SWPIM-BRI
U-interface

Site 1

U-interface