Citizen Systems iDP-3530 - Manual (Page 23)

iDP-3530 User’s Manual
CITIZEN
23
8. Print Control Functions
8-1 SI & SO Code
Symbol Code (Hex.) 8 bit data 7 bit data
SI 0F Standard character designation Designation of SI side character
(Same as US)
SO 0E Double-width character Designation of SO side character
designation (Same as RS)
8-2 Function Code
Symbol Code (Hex.) Function
LF 0A Feeds a new line after printing.
Feeds a new line after printing.
CR 0D You can select CR function in accordance with your
computer's output. For details, refer to 7. Function
select by Dip-switches.
RS 1E Enhanced character designation.
The designation is released with US code or line feed.
US 1F Standard character designation.
FF 0C Carries out from feed performance after printing.
DC 1 11 Makes the printer SELECT (ON LINE) state.
Only this code can be accepted irrespective of
DESELECT (OFF LINE) state.
DC 2 12 Red printing is specified / released.
Designation / release (alternative) of red one line
printing is possible with this code.
DC 3 13 Makes the printer DESELECT (OFF LINE) state.
CAN 18 Clears the print data in the buffer.
All the previous input data is cleared with this code.
ESC + "C" 1B, 43 Page length designation and paging action. Ref.to 8-3 (4).
ESC + "0" 1B, 4F Paging is off.
BEL 7 Cash drawer control.