Setting up the monitor, Attaching the base, Connecting your monitor – Dell ST2010B Flat Panel Monitor User Manual

Page 24: Connecting the blue vga cable

Back to Contents Page

Setting Up the Monitor

Dell™ ST2010B Flat Panel Monitor User's Guide

Attaching the Base

Attaching the Base

Connecting Your Monitor

Connecting the blue VGA cable

NOTE:

The base is detached when the monitor is shipped from the factory.

After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.

1. Place the monitor on a stable flat table.

2. Fit the groove on the base onto the riser of the monitor.

3. Push the hook to lock the stand base.

CAUTION:

Before you begin any of the procedures in this section, follow the

Safety Instructions

CAUTION:

The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.