Dell ST2010B Flat Panel Monitor - Manual (Page 14)

Submenus
Brightness/Contrast Use this menu to activate Brightness/Contrast adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Press the button to increase brightness and press the button to decrease brightness (min 0 ~ max 100).
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Press the button to increase contrast and press the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Back
Press to go back to the main menu.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for
use with your particular setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration. This option is only available when you are
using the analog (VGA)
Input Source The Input Source menu is to select between different video signals that may be connected to your monitor.
Auto Select
Scan for Sources. Press to scan for available input signals.
VGA
Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source.