Casio EX-FS10 User Manual

Page 127

127

Using the Camera with a Computer

Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.

• The camera does not draw power over the USB cable. Check the battery level

before connecting and make sure it is not too low.

• Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as
shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the

camera if you connect via a USB hub. Always connect directly to the
computer’s USB port.

Turn on the camera.

USB port

USB cable

Making sure that the 6 mark on the camera is aligned with
the 4 mark of the USB cable connector, connect the cable
to the camera.

USB/AV port

Large connector

Small connector