Dell Latitude E7450/7450 (Late 2014) - Manual (Page 27)

Installing the Display-Hinge Cover
1. Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the system
board.
2. Tighten the screw that secures hinge cap to the computer.
3. Instal:
a. palmrest
b. keyboard
c. keyboard trim
d. base cover
e. battery
4. Follow the procedures in After Working Inside Your computer .
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. battery
b. base cover
c. keyboard trim
d. keyboard
e. hard drive
f. palmrest
3. Unroute the WWAN and WLAN cable from the slot.
27