Creating a target in a non-clustered environment – Dell PowerVault NX1950 User Manual
Page 14
14
Configuring 3.1 Target
Creating a Target in a Non-Clustered Environment
Perform the following steps to re-create the Targets and re-assign the .vhd files
in a non-clustered environment:
1 Perform the following steps to configure the iSCSI Initiator to discover
the Target:
a
In the Discovery tab of the iSCSI Initiator, add the IP address of the
newly created highly available iSCSI instance. Click Advanced and
configure the following properties:
•
Local Adapter—Microsoft iSCSI Initiator
•
Source IP—IP address of the client for iSCSI traffic
b
If you are using iSNS server, right-click on iSCSI Target icon in
Microsoft Management Console
→ Properties→ iSNS tab and add
iSNS IP address.
c
Go to Initiator and add iSNS IP address in the Discovery tab.
2 To configure the Target, perform the following:
a
Right-click the Target icon in the Microsoft Management Console
and click Create iSCSI Target.
b
Enter the Target name, Target description, and click Next.
c
Browse for desired IQN identifier or click Advanced
→ Add→ IP address
and enter the IP address of the Initiator. Click Next.
d
Select the desired Target from the drop-down menu and click Next.
e
Click Finish. The Target is successfully created.