Cisco WRK54G - Manual (Page 17)

11 Chapter 4: Connecting the Wireless-G Broadband Router
Hardware Installation for Connection to Another Router
Wireless-G Broadband Router
9. Decide which network computers or Ethernet devices you want to connect to the Router.
Disconnect the selected computers or devices from the other router, and then connect them to the Router’s
numbered ports using standard Ethernet network cabling.
10. Connect the AC power adapter to the Router's Power port and the other end into an electrical outlet. Only use
the power adapter supplied with the Router. Use of a different adapter may result in product damage.
Now that the hardware installation is complete, proceed to
“Chapter 5: Configuring the Wireless-G Broadband Router”.
IMPORTANT: Make sure you use the power adapter
that is supplied with the Router. Use of a different
power adapter could damage the Router.
Figure 4-6: Connecting Your Network Devices
Figure 4-7: Connecting the Power