Dell 7700HD Projector - Manual (Page 89)

Projector Upgrade
Use the Projector Upgrade page to update your projector’s firmware.
NOTE: Please disable and enable wireless/network using the OSD to restart
the network card for the projector after firmware upgrade is successful.
NOTE: Ensure the wireless standby mode is turn on (default is off), follow these
steps: Advanced Settings -> Power Settings -> Wireless -> Always On.
To start the firmware update, follow these steps:
1 Plug in the power cord and the projector will enter standby mode.
2 Connect the LAN cable to the projector and your computer.
3 Open your Internet browser and then enter the IP address (default IP address is
192.168.100.10).
4 At Projector Upgrade web page, press Browse to select the file to update.
Using Your Projector 89