Dell 7700HD Projector User Manual

Page 47

LAN S

ETTINGS

—

Select and press

to activate LAN settings. The LAN settings

menu provides the following options:

IRELESS AND

LAN—

Select Enabled to active the Wireless and LAN

function.

DHCP—

If a DHCP server exists in the network to which the projector is

connected, the IP address will automatically be acquired when you select

DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,

and Gateway. Use

and

to select the number of IP address, Subnet

Mask, and Gateway. Key in enter to confirm each number and then use

and

to set the next item.

IP A

DDRESS

—

Automatically or manually assigns the IP address to the

projector connected to the network.

UBNET

ASK

—

Configure the Subnet Mask of the network connection.

ATEWAY

—

Check the Gateway address with your network/system

administrator if you configure it manually.

DNS—

Check the DNS Server IP address with your network/system

administrator if you configure it manually.

TORE

—

Press to save the changes made in network configuration

settings.

NOTE:

1. Use

and

buttons to select IP Address, Subnet Mask,

Gateway, DNS, and Store.

2. Press the

button to enter IP Address, Subnet Mask, Gateway, or

DNS to set the value. (The selected option is highlighted in blue)

a Use

and

buttons to select the option.

b Use

and

buttons to set the value.

c After the setup is complete, press the

button to exit.

Using Your Projector