Dell Inspiron Zino (300, Late 2009) User Manual
Page 42

Memory Speed
Indicates the memory speed in MHz
Memory Technology
Indicates the type of installed memory
Main
Service Tag Setting
Displays the service tag of the computer if the service tag is present or provides a field to input the
service tag manually when the service tag is absent
System Time
Displays current time in hh:mm:ss format
System Date
Displays the current date in mm/dd/yy format
SATA-0
Displays the SATA drive connected to the SATA-0 connector
SATA-1
Displays the SATA drive connected to the SATA-1 connector
eSATA-0 (applicable for Inspiron 400 computer
only)
Displays the eSATA drive connected to the eSATA-0 connector
eSATA-1 (applicable for Inspiron 400 computer
only)
Displays the eSATA drive connected to the eSATA-1 connector
Keyboard Errors
Displays keyboard errors when set to Report
Default is Report
Advanced Settings
Inspiron 300
CPU Feature
l
Limit CPUID Value—Enabled or Disabled (Disabled by default)
l
CPU XD Support—Enabled or Disabled (Enabled by default)
l
Hyper-Threading Technology—Enabled or Disabled (Enabled by default)
l
Virtualization (Hidden if CPU is not supported)—Enabled or Disabled (Enabled by default)
Integrated Graphics Configuration
l
DVMT Mode Select—DVMT Mode
l
DVMT/FIXED Memory—128 MB
Integrated Peripherals Configuration
l
Onboard Audio Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Boot ROM—Enabled or Disabled (Disabled by default)
Inspiron 400
CPU Feature
l
Secure Virtual Machine Mode—Enabled or Disabled (Enabled by default)
l
AMD Cool 'N' Quiet—Enabled or Disabled (Enabled by default)
Integrated Graphics Configuration
UMA Frame Buffer Size—Auto, 32 MB, 64 MB, 128 MB, 256 MB, or 512 MB (Auto by default)
Integrated Peripherals Configuration
l
Onboard SATA Controller—Enabled or Disabled (Enabled by default)
l
SATA Mode—ATA or AHCI (AHCI by default)
l
Onboard Audio Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Boot ROM—Enabled or Disabled (Disabled by default)
USB Device Setting
l
USB Controller—Enabled or Disabled (Enabled by default)
l
USB Operation Mode (Appears when "USB Controller" is enabled)—FullSpeed or HiSpeed
(HiSpeed by default)
Numlock Key
On or Off (On by default)
Fast Boot
Enabled or Disabled (Enabled by default)
Power Management
ACPI Suspend Type
Specifies the suspend type
Default is S3
AC Recovery
Power Off, Power On, or Last Power State (Off by default)
Low Power Mode (applicable for Inspiron 400
computer only)
Enabled or Disabled (Enabled by default)
Remote Wake Up
Enabled or Disabled (Enabled by default)
Auto Power On
Enabled or Disabled (Disabled by default)
Auto Power On Date (Displays only when "Auto
Power On" is set to Enabled)
Specifies the power on date
Default is 15
Auto Power On Time (Displays only when "Auto
Power On" is set to Enabled)
Specifies the power on time
Default is 12:30:30
Security Settings
Unlock Setup Status
Unlocked
Supervisor Password
Status of supervisor password installed