Replacing the system board, Procedure, Post-requisites – Dell Inspiron 15 (5547, Early 2014) User Manual
Page 62

Replacing the System Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer’s Service Tag is stored in the system board. You
must enter the Service Tag in the system setup after you replace the
system board.
Procedure
CAUTION: Make sure that no cables are placed under the system
board.
1
Slide the ports into the slots on the palm-rest assembly and align the
screw holes on the system board with the screw holes on the palm-rest
assembly.
2 Replace the screws that secure the system board to the palm-rest
assembly.
3 Adhere the antenna cable to the system board.
4 Connect the hard-drive cable to the system board.
Post-requisites
1
Replace the
2 Replace the
3 Replace the
.
4 Replace the
.
5 Replace the
6 Replace the
7
Replace the
8 Follow the procedure from step 3 to step 5 in replacing the
9 Replace the
10 Replace the
62