Dell Precision T7610 (Late 2013) - Manual (Page 24)

Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. cover
b. air tunnel (if available)
3. Press down on the memory-securing clips on each side of the memory module, and lift the memory module
upwards to remove it from the computer.
Installing the Memory
1. Insert the memory module into the memory socket.
2. Press down on the memory module until the securing clips secure the memory in place.
3. Install:
a. air tunnel (if available)
b. cover
4. Follow the procedures in After Working Inside Your Computer .
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. cover
b. air tunnel (if available)
3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell
battery out of the computer.
24