Dell S520 Projector - Manual (Page 5)

5
1. Determine desired height of image (measured
from floor) (Figure 1).
2. Determine desired center of image area (Figure 1).
3. Measure 4-1/16” up from desired height (top) of
image and 4” to the right of center of screen and
mark location (Figure 1).
4. Determine location of studs behind drywall.
5. Drill one pilot hole into a wall stud at location
marked in Step 3 (Figure 1).
Studs
Center of
Screen
Floor
73-3/4 in.
46-1/8 in.
4-1/16 in.
Figure 1
4 in.
Height
from Floor
Installation