Dell Vostro A180 (Early 2009) - Manual (Page 44)

Troubleshooting
44
NOTE: If you see a message stating
that no diagnostics utility partition has
been found, run the Dell Diagnostics
from the Drivers and Utilities media.
4 Press any key to start the Dell Diagnostics
from the diagnostics utility partition on your
hard drive, and follow the instructions on the
screen.
Starting the Dell Diagnostics From the Dell
Drivers and Utilities Media
1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
3 When the DELL logo appears, press
immediately.
NOTE: If you wait too long and the
operating system logo appears,
continue to wait until you see the
Microsoft
® Windows ® desktop; then,
shut down your computer and try
again.
NOTE: The next steps change the boot
sequence for one time only. On the
next start-up, the computer starts
according to the devices specified in
the system setup program.
4 When the boot device list appears, highlight
CD/DVD/CD-RW and press .
5 Select the Boot from CD-ROM option from
the menu that appears and press .
6 Type 1 to start the CD menu and press
to proceed.
7 Select Run the 32 Bit Dell Diagnostics from
the numbered list. If multiple versions are
listed, select the version that is appropriate
for your computer.
8 When the Dell Diagnostics Main Menu
appears, select the test that you want to run,
and follow the instructions on the screen.
book.book Page 44 Thursday, June 26, 2008 12:10 PM