Dell Dimension 4500 - Manual (Page 46)

Diskette Configuration Submenu
Event Log Configuration Submenu
Option Function
Drive Installed Displays the primary IDE device type.
Type Specifies the type of hard drive. Settings for this option are User, Auto, CD-ROM, ATAPI Removable, Other ATAPI, IDE Removable, and
None.
Maximum
Capacity Displays the maximum capacity of the primary IDE device.
LBA Mode Displays whether LBA mode control is enabled or not on the primary IDE device.
Block Mode Displays the multi-sector transfer setting of the primary IDE device.
PIO Mode Displays the PIO mode setting of the primary IDE device.
Ultra DMA Displays the ultra DMA setting of the primary IDE device.
Cable Detected Displays the type of cable connected to the primary IDE device.
Option Function
Diskette Controller Configures the floppy drive interface. Options are Enabled (default) and Disabled.
Floppy A Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88 MB 3
1/2".
Diskette Write
Protect Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is not
protected unless the write-protect tab is in place.