Dell PowerVault DR2000v User Manual

Page 18

Text mode
Original mode

Setting Up the Dell™ DR Series System as a CIFS Backup Target on EMC Networker | February 2014

Note: On DR4x00 systems, the maximum supported CIFS connections per appliance is 32; on the
DR6000 system the maximum is 64. Therefore, there should not be more than 32 and 64 corresponding
clients connected/mapped to a single DR Series system for backup at the same time. For details, see the

Dell DR Series System Interoperability Guide

11. The new Networker device should have Pool Type set to Backup. Click Next.

12. Review the configuration and then click Configure.