Dell SX2210T Touch Monitor - Manual (Page 35)

Connecting the USB Cable
After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your
monitor setup:
1. Connect the downstream USB connector (cable supplied) to an appropriate USB connector on your computer.
2. Connect USB peripherals to the upstream USB connectors on the monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems.
5. Use the cable holder on the monitor stand to organize the cables.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor ) use the cable management slot to organize all cables as
shown above.
Attaching the Soundbar (Optional)
NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.