Dell Dimension 3100/E310 User Manual

Page 29

Text mode
Original mode

Disconnect the USB cable on the back of the Media Card Reader from the FlexBay USB connector on the

system board

and route the cable through the

clip on the shroud.

Grasp the sliding plate lever and push it towards the base of the computer; then, hold it in place while you slide the Media Card Reader from the
computer.

Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

Replace the

drive panel

Replace the

computer cover

Connect your computer and devices to their electrical outlets, and turn them on.

1 cables

2 Media Card Reader (not present on all computers)

1 sliding plate lever

2 sliding plate

3 Media Card Reader

NOTICE:

To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.