Dell PowerEdge FX2/FX2s - Manual (Page 4)

Limitations
• Limitation: The remote racadm testfeature command (racadm -r
testfeature
..) does not support the -d (debug) option.
Resolution: None.
• Limitation: For Single Sign-On and Smart Card login, the client system must be a part of the
Active Directory domain and Kerberos Realm
Resolution: On Windows clients, under the Local Security Polices, make sure to configure the
security option "Network security: Configure encryption types allowed for Kerberos." This policy
setting allows you to set the encryption types that Kerberos is allowed to use. The DES_CBC_MD5
encryption type must be selected. If this encryption type is not selected, the encryption type will
not be allowed. This setting may affect compatibility with client computers or services and
applications.
• Limitation: When you add a member chassis to a chassis group, you cannot specify the new
group member with an IPv6 address.
Resolution: Use IPv4 addressing.
Installation
Prerequisites
See the Dell Chassis Management Controller for PowerEdge FX2 Version 1.10 User's Guide for the
following information:
• Prerequisites
• Hardware and software requirements
• Installation and configuration
Check for latest CMC firmware at dell.com/support/.
Installation Instructions
1. Set up initial access to CMC. `
2. Access CMC through a network.
3. Add and configure CMC users.
4. Update CMC firmware.
For more information, see the Chassis Management Controller for PowerEdge FX2 Version 1.1.0 User's
Guide, available at www.dell.com/esmmanuals.
Contacting Dell
Note: If you do not have an active Internet connection, you can find contact information on your
purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by
country and product, and some services may not be available in your area. To contact Dell for sales,
technical support, or customer service issues:
1. Visit www.dell.com/support.
2. Select your support category.