Clarion CZ200 - Manual (Page 23)

23
English
Français
Español
Notes on installation
1. Before installation, please make sure that
all connections have been properly made
and the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit. The use of
other unauthorized accessories may result
in damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit where it will be
exposed to heat to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in degraded performance.
6. To prevent electric spark, connect the
positive pole first and then the negative
pole.
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may result in damage to this unit.
Unit installation
Method A
1. Insert mounting bracket into dash
board, choose appropriate mounting tab
according to the gap width, bending the
mounting tab outwards with a screwdriver
to fix the mounting bracket in place.
2. Slide the unit into the bracket until you
hear a click sound.
Dashboard
Mounting bracket
Screwdriver