Clarion CZ200 - Manual (Page 17)

17
English
Français
Español
Press the [ SOUND] button to enter sound
effect setting mode. First press shows
current EQ. Rotate the [ VOLUME] knob to
change the options in the following order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Press the [ SOUND] button, then press
[ , ] to select USER preset including:
Audio Setup
In the radio mode, press and hold the [ ADJ]
button to enter system MENU. Press [ ,
] to select options, rotate the [ VOLUME]
knob to adjust.
CLOCK
Press the knob to enter clock setting mode,
Rotate the knob to set clock, press [ ] or
[ ] to select hour or minute, press and hold
the knob to confirm.
DX/LO
In the radio mode, rotate the knob to choose
radio local or distant.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals
can be received.
AUX SENS
Rotate the knob to choose AUX Input
sensitivity LOW, MID or HIGH at AUX mode.
SCRN SVR: ON/OFF
Rotate the knob to choose screen saver on
or off.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK
-> FOLDER -> FILE -> ALBUM -> TITLE
-> ARTIST -> TRACK ->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing the [ DISP]
button.
System Setup
DIMMER: ON/OFF
Rotate the knob to choose dimmer on or off.
ON: The LCD is dimmed when the interior
light is on.
OFF: The LCD stays at maximum brightness.
REAR/S-W
Rotate the knob to choose REAR LINE OUT
or SUB-WOOFER.
TEL-SW
Rotate the knob to choose TELE-PHONE
MUTE, ON or OFF.
OFF: This unit continues normal operation
even when the cellular phone is used.
ON: You can listen to your telephone calls
from the speakers connected to this unit.
* When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ VOLUME] knob.
MUTE: The sound from this unit is muted
during telephone calls.
BEEP: ON/OFF
Rotate the knob to choose button beep
sound on or off.
12/24H
Rotate the knob to choose time format: 12 or
24 hour.
BALANCE -> FADER -> M-B EX -> LPF(low
pass filter) -> SUBW VOL, rotate the
[ VOLUME] knob to select a value.
BALANCE: LEFT 1-7 -> CENTER -> RIGHT
1-7
FADER: LEFT 1-7 -> CENTER -> RIGHT 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6)-(+6)