Dell OptiPlex FX160 (Late 2008) - Manual (Page 28)

Back to Contents Page
Power Supply
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the Power Supply
Replacing the Power Supply
Removing the Power Supply
1. Perform the procedure in Before Working on Your Computer .
2. Disconnect the 12V power supply connector from the system board (see System Board Connectors ).
3. Remove the back panel screw.
4. Remove the chassis screw.
5. Slide the power supply slightly toward the front of the computer and lift up out of the chassis.
Replacing the Power Supply
1. Place the power supply in the chassis and slide it back against the back panel.
WARNING: The power supply can become very hot during normal operation. Allow the power supply to cool before touching it.
1 power supply 12V connector 2 back panel screw
3 power supply 4 chassis screw
1 back panel screw 2 chassis screw